Step-by-Step Tutorial

How to Draw a Cylinder That Stands Up Straight

Learn how to draw a cylinder with two measured ellipses and six short steps, then warm up your eye in the cube game below.

Play the Daromeon Cube Challenge

Ready to draw the missing cube?

Press Play when you are ready to draw. The game starts only after you choose to play.

Loading Daromeon…

Preparing your drawing challenge…

How to Draw a Cylinder: The Short Version

Here is how to draw a cylinder in pencil, one line per step.

  1. Draw a vertical center line and two equal width marks.
  2. Draw a narrow top ellipse centered on the line.
  3. Draw a rounder bottom ellipse; dash its back half.
  4. Join the ends with two straight sides.
  5. Shade the side in vertical bands from one light.
  6. Add a light top, a contact line and a cast shadow.

How to Draw a Cylinder Step by Step

This is how to draw a cylinder standing below eye level, lit from the upper left, with an HB and a 4B pencil.

  1. 1Step

    Step 1. Draw a center line and two width marks

    Draw a light vertical line for the axis. Mark the top and the bottom, then draw two equal width marks across it. Every step of how to draw a cylinder hangs on this line, so keep it straight.

    Mistake: width marks of different lengths.

    EYE LEVELCENTER LINESAME WIDTH1
  2. 2Step

    Step 2. Draw a narrow top ellipse

    Draw the top ellipse so the line cuts it into equal halves. The top is close to eye level, so the ellipse is thin: in our model it measures 12 degrees. In how to draw a cylinder, the ellipse degree tells the viewer where their eye is.

    Mistake: an ellipse with pointed ends.

    EYE LEVELNARROW TOP12 DEGREES2
  3. 3Step

    Step 3. Draw a rounder bottom ellipse

    The bottom is farther below your eye, so its ellipse opens up. Ours measures 30 degrees, 2.5 times rounder than the top. Draw it through the same width marks and dash the back half. Most people learning how to draw a cylinder copy the top ellipse here.

    Mistake: a bottom ellipse as thin as the top.

    EYE LEVELROUNDER BOTTOM30 DEGREES3
  4. 4Step

    Step 4. Join the sides

    Draw two straight vertical lines from the ends of the top ellipse to the ends of the bottom one. They touch each ellipse at its widest point, not inside it. Erase the hidden back half of the bottom. That is how to draw a 3D cylinder in line.

    Mistake: sides that bulge or lean in.

    EYE LEVELTOUCH THE ENDSSTRAIGHT SIDES4
  5. 5Step

    Step 5. Shade in vertical bands

    Pick one light and draw an arrow to it. On a round side, every tone runs straight down, so the terminator is a straight line, not a curve. With our light, it sits 83 percent of the way across. Darken a core shadow band just past it, and keep the far edge a little lighter for reflected light. This is how to draw a cylinder that turns.

    Mistake: shading darkest at both edges.

    TERMINATORCORE SHADOWREFLECTED5
  6. 6Step

    Step 6. Finish the top, contact and cast shadow

    Keep the top ellipse the lightest shape, because it faces the light. Leave a thin highlight strip on the lit side. Add a dark contact line along the front of the base and a cast shadow on the table, away from the light. That finishes how to draw a cylinder.

    Mistake: a top as dark as the side.

    LIGHTEST TOPCAST SHADOWCONTACT SHADOW6

Now you know how to draw a cylinder below eye level. Draw it again with the eye level lower, near the middle of the form.

How to Draw a Cylinder in Perspective: Box It First

Cube Challenge Practice round showing one cube face in perspective, ready for the missing edges to be drawn
A Practice round: one face is given; you draw the rest of the box.

When you learn how to draw a cylinder in a scene, draw a box first and fit the ellipses inside its square ends, touching the middle of each edge. The Cube Challenge above trains that box.

Each round shows one face of a cube in true 3D perspective; you draw the missing edges and get a score from 0 to 100. A box that is too shallow squashes the cylinder inside it, so check the box before you draw a cylinder in perspective.

Jump back to the game

Cylinder Drawing in a Box: Find the Ellipse First

A circle fits a square, so a cylinder fits a box. This is the fastest check for how to draw a cylinder at any angle.

Box first

  • A square box as tall as the cylinder.
  • Mark the middle of each top edge.
  • Both square ends share the same vanishing points.

Cylinder in the box

  • The top ellipse touches all four marks.
  • The sides touch the ellipse ends.
  • Erase the box once the ellipses look right.

Same box, two passes: the box with its midpoints (left), and how to draw a cylinder inside it (right).

How to Draw a Cylinder Without Six Common Mistakes

Each pair puts the wrong version beside the fix. These are the problems we see most when people learn how to draw a cylinder.

  1. WRONGFIXED

    1. Ellipses with pointed ends.Fix: keep both ends round.

  2. WRONGFIXED

    2. A flat, straight bottom.Fix: curve it like the ellipse.

  3. WRONGFIXED

    3. Top and bottom ellipses the same.Fix: open the lower one up.

  4. WRONGFIXED

    4. An ellipse tilted off the center line.Fix: keep it square to the axis.

  5. WRONGFIXED

    5. Shading in horizontal stripes.Fix: run tones straight down.

  6. WRONGFIXED

    6. A heavy dark outline.Fix: let tone make the edge.

How to Shade a Cylinder: A Quick Self-Check

After every cylinder, step back and ask these four questions. They cover how to shade a cylinder with any pencil.

  • Is the lower ellipse rounder than the upper one?
  • Do the sides touch the ellipse ends?
  • Does every tone band run parallel to the sides?
  • Is the top lighter than the lit side?

Turn your drawing upside down. If the ellipses still look even and the bands still look straight, you know how to draw a cylinder that works.

Cube Challenge result for a box drawn too shallow, its depth edges stopping halfway, scoring 34.17 points, grade D
Cube Challenge result for a box with every edge on its vanishing point lines, scoring 100.00 points, grade S
Left: depth edges drawn at half length, 34.17 points (grade D). Right: edges on the vanishing point lines, 100.00 points (grade S).

Practice Plan: Drawing Cylinders in 7 Days

Fifteen minutes a day. Each day changes one thing about how to draw a cylinder.

DayWhat to draw
Day 1One page of ellipses: thin, medium and round.
Day 2How to draw a cylinder in line, ten times: narrow top, round bottom.
Day 3How to draw a cylinder lying on its side, five times.
Day 4How to draw a cylinder in full, three times, with shading.
Day 5How to draw a cylinder with the light on the right.
Day 6Five game rounds, then how to draw a cylinder inside a box.
Day 7Draw a mug and a can from life; compare with Day 4.

Once you know how to draw a cylinder, learn how to draw a cube so your boxes hold their ellipses. For a round form with no straight sides, try how to draw a sphere next.

How We Tested These Steps

We projected every diagram for how to draw a cylinder from a 3D model: a cylinder 1.2 units tall and 1 unit wide, 4 units away, with the eye 0.8 units above its top. The ellipses are the projected circles, measured at 12 and 30 degrees, and the tone bands follow Lambert’s law, so the 83 percent terminator is computed, not guessed.

On November 17, 2026, we tested the box part of how to draw a cylinder in the Cube Challenge, in untimed Practice mode. A box with its depth edges drawn at half length scored 34.17 (grade D). A box with every edge on its vanishing point lines scored 100.00 (grade S). Tested by the Daromeon team.

Limits: the game always shows a cube, so it cannot grade ellipses, curves or shading. Check those parts of how to draw a cylinder on paper.

How to Draw a Cylinder: FAQ

Why is the bottom ellipse rounder than the top?

You see the bottom from a steeper angle. The farther a circle is above or below your eye level, the rounder it looks. At eye level it is a flat line. This one rule fixes most problems in how to draw a cylinder.

How do you draw a 3D cylinder that does not look flat?

Make the bottom a curve, not a straight line; make the lower ellipse rounder; and shade in vertical bands with a core shadow. That is the whole of how to draw a 3D cylinder: two ellipses, two lines, one light. Check the bottom first; it is where how to draw a cylinder usually goes wrong.

How do you shade a cylinder with a pencil?

Use an HB for the lit side and a 4B for the core shadow. Shade with vertical strokes, light to dark, and leave a thin strip of paper for the highlight. Cylinder shading is the same five tones as a sphere, stretched into straight bands, and it is the last step of how to draw a cylinder.

How do you draw a cylinder lying on its side?

Turn the center line so it lies flat. The ellipses now stand up, at a right angle to that line, and the sides run toward a vanishing point. For how to draw a cylinder lying on its side, draw a long box first and fit the ellipses in its ends.

How do you draw a cylinder in perspective?

To learn how to draw a cylinder in perspective, draw a box in two-point perspective, then fit an ellipse inside each square end so it touches the middle of all four edges. Join the ellipse ends with straight lines. A cylinder in perspective is only as good as the box around it.

What should I practice besides drawing cylinders?

Ellipses first: fill a page with them at different degrees. Then boxes, because every cylinder drawing in perspective starts with one, and spheres for shading. Ten minutes a day in that order is the fastest way to learn how to draw a cylinder from memory.

Ready to Draw a Cylinder?

Warm up with the box first: open the game, draw the missing cube edges, then practice how to draw a cylinder on paper.

Back to Daromeon