How to Draw a Cone That Points Straight Up
Learn how to draw a cone with one measured ellipse and two tangent sides, then warm up your eye in the cube game below.
Play the Daromeon Cube Challenge
Ready to draw the missing cube?
Press Play when you are ready to draw. The game starts only after you choose to play.
Loading Daromeon…
Preparing your drawing challenge…
How to Draw a Cone: The Short Version
Here is how to draw a cone in pencil, one line per step.
- Draw a center line, a tip dot and a base width mark.
- Draw the base ellipse; dash its back half.
- Draw two sides from the tip that just touch the ellipse.
- Erase the back of the base.
- Shade in wedges that meet at the tip.
- Add a contact line and a pointed cast shadow.
How to Draw a Cone Step by Step
This is how to draw a cone standing below eye level, lit from the left, with an HB and a 4B pencil.
- 1Step
Step 1. Place the tip over the center
Draw a light vertical center line. Put a dot at the top for the tip and a width mark across the bottom for the base. The tip must sit on this line, straight above the middle of the base. Everything in how to draw a cone hangs on that one line.
Mistake: a tip that drifts off the line.
- 2Step
Step 2. Draw the base ellipse
Draw an ellipse through the ends of the width mark, cut in half by the center line. The base is below your eye, so the ellipse is fairly open: in our model it measures 27 degrees. In how to draw a cone, this ellipse decides how far down the viewer looks.
Mistake: an ellipse with pointed ends.
- 3Step
Step 3. Draw two sides that touch the ellipse
From the tip, draw two straight lines that just touch the ellipse. They meet it a little behind its widest points, not at the ends: in our model, about a fifth of the way up the back half. This tangent is the step most guides skip when they show how to draw a cone.
Mistake: sides that cut into the ellipse.
- 4Step
Step 4. Erase the back of the base
Erase the back half of the ellipse between the two sides. You now have a clean line drawing; this is how to draw a cone in line: one curve, two straight sides and a point.
Mistake: leaving the whole base visible.
- 5Step
Step 5. Shade in wedges toward the tip
On a cone, each line from the tip to the base keeps one tone all the way down, so the tone bands are wedges that narrow to the point. With our light, the terminator runs from the tip to a spot 75 percent of the way across the base. Darken a core shadow wedge just past it and keep the far edge a little lighter. This is how to draw a cone that turns.
Mistake: shading in vertical stripes.
- 6Step
Step 6. Add contact and a pointed cast shadow
Leave a thin highlight wedge on the lit side. Add a dark contact line along the front of the base. The cast shadow runs away from the light and ends in a point, because the tip casts a point. That finishes how to draw a cone with full shading.
Mistake: a round, blob-shaped cast shadow.
Now you know how to draw a cone below eye level. Draw it again with the eye level lower, so the base ellipse gets thinner.
How to Draw a 3D Cone in a Scene: Start From a Box

In a still life or a room, how to draw a cone starts with a square box. Fit the base ellipse into the bottom square, find the center of the top square with two diagonals, and put the tip there.
The Cube Challenge above tests that box. You get one face of a cube; you add the edges you think are missing; the game scores the result out of 100. Five rounds before you practice how to draw a cone on paper is a good warm-up.
Jump back to the gameCone Drawing in a Box: Find the Tip First
A circle fits a square, so a cone fits a box. This is the fastest check for how to draw a cone at any angle.
Box first
- A square box as tall as the cone.
- Cross both squares with diagonals.
- Join the two centers with a vertical line.
Cone in the box
- The base ellipse touches all four bottom edges.
- The tip sits on the top center.
- Erase the box once the cone looks right.
Same box, two passes: the box with its centers (left), and how to draw a cone inside it (right).
How to Draw a Cone Without Six Common Mistakes
Each pair puts the wrong version beside the fix. These are the problems we see most when people learn how to draw a cone.
1. A base ellipse with pointed ends.Fix: keep both ends round.
2. A flat, straight base.Fix: curve it like the ellipse.
3. A tip that leans off center.Fix: put it over the base center.
4. The whole base drawn solid.Fix: show only the front curve.
5. Shading in vertical stripes.Fix: shade wedges toward the tip.
6. A heavy dark outline.Fix: let tone make the edge.
How to Shade a Cone: A Quick Self-Check
After every cone, step back and ask these four questions. They cover how to shade a cone with any pencil.
- Is the tip straight above the center of the base?
- Do the sides touch the ellipse instead of crossing it?
- Do the tone bands narrow toward the tip?
- Does the cast shadow end in a point?
Hold a pencil upright against your drawing. If the tip and the base center both touch it, you know how to draw a cone that stands up.


Practice Plan: Cone Drawing in 7 Days
Fifteen minutes a day. Each day changes one thing about how to draw a cone.
| Day | What to draw |
|---|---|
| Day 1 | One page of ellipses, then ten tips placed over their centers. |
| Day 2 | How to draw a cone in line, ten times: tangent sides only. |
| Day 3 | How to draw a cone tall and short; keep the base the same. |
| Day 4 | How to draw a cone with full shading, three times. |
| Day 5 | How to draw a cone lying on its side, inside a long box. |
| Day 6 | Five game rounds, then how to draw a cone inside a box. |
| Day 7 | How to draw a cone from life: a party hat and a traffic cone. |
Once you know how to draw a cone, try how to draw a cylinder: it uses the same ellipse twice. If the base keeps going wrong, slow down with how to draw an ellipse.
How We Tested These Steps
We projected every diagram for how to draw a cone from a 3D model: a cone 1.2 units tall on a base 1 unit wide, 4 units away, with the eye 0.6 units above its tip. The base ellipse measures 27 degrees, the sides touch it 4 pixels behind its widest points, and the wedges follow Lambert’s law, so the 75 percent terminator is computed, not guessed.
On November 18, 2026, we tested the box part of how to draw a cone in the Cube Challenge, in untimed Practice mode. A box drawn toward the wrong side of the face scored 5.97 (grade D). A box with its edges on the vanishing point lines scored 91.85 (grade S). Tested by the Daromeon team.
Limits: the game always shows a cube, so it cannot grade ellipses, tangents or shading. Check those parts of how to draw a cone on paper.
How to Draw a Cone: FAQ
Where do the sides of a cone meet the base?
Where a straight line from the tip just touches the ellipse. Seen from above, that is a little behind the widest points, toward the back. If you run the sides to the very ends, the cone gets small corners at the base. This one detail fixes most problems in how to draw a cone.
How do you draw a 3D cone that does not look flat?
Curve the base instead of drawing a straight line, hide the back of the ellipse, and shade in wedges with a core shadow. That is the whole of how to draw a 3D cone: one ellipse, two tangent lines, one light. In how to draw a cone, a 3D cone drawing almost always fails at the base first.
How do you shade a cone with a pencil?
Use an HB for the lit side and a 4B for the core shadow. Stroke from the base toward the tip so every mark points at the apex, and leave a thin wedge of paper for the highlight. Cone shading is the cylinder’s five tones squeezed into wedges, and it is the last step of how to draw a cone.
How do you draw a cone lying on its side?
Draw a long box lying down, fit the base ellipse into one square end, and put the tip in the center of the other end. The ellipse now stands up, and the sides still touch it. For how to draw a cone at any angle, the box does the hard part.
What is the easiest way to learn how to draw a cone step by step?
Practice the base alone first: ten ellipses, each with a dot straight above its center. Then add the two tangent sides, the heart of how to draw a cone. Shading comes last. Drawing a cone in that order takes about a week of short sessions.
What should I practice besides drawing a cone?
Ellipses, because every cone sits on one; boxes, because they place the tip; and spheres, for shading. Ten minutes a day in that order is the fastest way to learn how to draw a cone from memory.
Ready to Draw a Cone?
Warm up with the box first: open the game, draw the missing cube edges, then practice how to draw a cone on paper.